B3R Garage: The 84 Capri Project Hits The Road

It has take quite a while, but it has happened. My 1984 Mercury Capri has finally hit the road at an acceptable speed. Over the past two weekends I have been able to jump in and cruise up and down the road in my neighborhood a few times. Doing so was convenient for calibrating the carb and testing the transmission. However, this weekend I felt comfortable enough to leave the neighborhood and head down to the local gas station. Prior to leaving I conveniently fixed a slight battery charging issue by replacing the original 1982 alternator with a fresh one. So, the trip went well. I know that the hood is still missing (I need a hole in the middle of it so that it will fit), but below is a small clip of the '84 Capri getting warmed up for the short ride.

B3R Garage: An Old Cam Fixes a New Problem

My 1984 Mercury Capri has been the cause of many headaches over the past few months. There was a time where I could hop in and turn the key and the car would start. However, after a few times of starting the car it appeared as though the timing would change and the car would backfire out the exhaust and the intake. So, I invited a family member down to look at the issue. As it turned out the $240 Edelbrock (part #7122) cam and lifter kit I installed had burnt out. This really made me mad. The Mad Scientist and I followed the instruction to the "T" for installing it and took liberal lubrication to the extreme. However, the third piston lobes and lifters seemed to grind down to a smooth cave in a matter of a few operational hours. I ended up pulling the Edelbrock cam and lifters, just to put back in the original cam, and some over-counter lifter. With the old equipment in the car runs like a champ. Unfortunately, I am lacking the power I was promised and expecting from Edelbrock I can at least go down the road.

B3R Garage: All new Still Issues

The 1984 Mercury Capri was intended to be a work in progress. However, I did have a time-frame in mind that I would like to have been driving it! Over the past few months I have been spending my weekends traveling to the Mad Scientist in order to work out the bugs with his 1970 Ford Maverick-leaving the Capri on the back burner. While helping the Mad Scientist, I would put as much spare time as I could tinkering with my Capri. Unfortunately, I could not figure out the idling issue on my own. So, I had to recruit some help from someone willing to travel just to see the engine. I called Pep!

B3R Garage: A Surprising Resolution

As you may know the Mad Scientist has been driving his 1970 Ford Maverick around for almost a month know. Interestingly enough, he has been doing so with an unidentified Ford 302 block with a Frankenstein Holley carburetor. That's right the carb was put together with parts from three different carbs! Unfortuantly the car would move but the secondaries would never open up. So, we never knew exactly what the old car could do.

That was until the Mad Scientist went out and nabbed a brand new 600 cfm single pumper Holley of the shelf. He threw the new carb on and guess what! The car sounded like CRAP!. It would idle real nice until he put his foot anywhere near the pedal. This was confusing to say the least.

After about two weeks of insanity checking the timing, replacing sparkplug wires, spark plugs, and the distributor cap and rotor the Mad Scientist had enough. He was about to push the old car into the back yard and tarp it over for good. Until he got the idea of removing the valve cover and watching each of the valves open and close as he manually cranked over the engine.

As it turned out, the timing was off. Way OFF! What the Mad Scientist and I though was a standard Ford 302 block (With regular firing order 1-5-4-2-6-3-7-8) was actually a Ford 302 HO motor (with a firing order of 1-3-7-6-5-4-8) .

I won't lie, this discovery simply blew my freaking mind! Just one week before the Mad Scientist put on the new carb we where out driving though town. Granted we where only going about 35mph the car still sounded PERFECT! It was quite, smooth, and not backfiring.

Now that the Maverick's kinks have been worked out and we know everything there is to know about our little Maverick, the car drives smooth and has no problem breaking the 100mph in a relativity short distance. If we could just get the back tires to stop spinning when we hover over the gas pedal we might even be able to get the front end off the ground!